Select this choice to select the memory speed or to specify a preset operating mode to configure the server for maximum power savings, maximum efficiency, or maximum performance.
-Efficiency mode
Select this choice to maintain the optimal balance between performance and power consumption. The server generally produces the best performance per watt while it is in this mode.
-Acoustic mode
Select this choice to configure the server to draw the minimum amount of power and generate the least noise. Server performance might be degraded depending on the application that you are running.
-Performance mode
Select this choice to achieve the highest absolute performance for most server applications. The power consumption in this mode is often higher than in the Efficiency or Acoustics mode.
-Custom mode
Select this choice only if you understand the functions of the
–Integrated Management Module
Select this choice to view or change the settings for the integrated management module.
-POST Watchdog Timer
Select this choice to view or enable the POST watchdog timer.
-POST Watchdog Timer Value
Select this choice to view or set the POST loader watchdog timer value.
-Reboot System on NMI
Enable or disable restarting the server whenever a nonmaskable interrupt (NMI) occurs. Disabled is the default.
-Commands on USB Interface Preference
Enable or disable the Ethernet over USB interface on IMM.
-Network Configuration
Select this choice to view and select the system management network interface port, the IMM MAC address, the current IMM IP address, and host name; define the static IMM IP address, subnet mask, and gateway address; specify whether to use the static IP address or have DHCP assign the IMM IP address; save the network changes; and reset the IMM.
-Reset IMM to Defaults
Select this choice to view or reset the IMM to the default settings.
-Reset IMM
Select this choice to reset the IMM settings.
–Legacy Support
Select this choice to view or set legacy support.
-Force Legacy Video on Boot
Select this choice to force INT video support, if the operating system does not support UEFI video output standards.
-Rehook INT
98IBM System x3850 X5 and x3950 X5 Types 7145, 7146, 7143, and 7191: Installation and User's Guide