Icom IC-7700 ■Break-infunction, DSemi break-inoperation, DFull break-inoperation, FUNCTIONS FOR TRANSMIT

■Break-in functionDSemi break-in operation

BK-IN[DELAY] (outer control)

[KEY SPEED] (inner control) CW

FUNCTIONS FOR TRANSMIT 6

The break-in function is used in CW mode to automatically toggle the transceiver between transmit and receive when keying. The IC-7700 is capable of full break-in or semi break-in.

During semi break-in operation, the transceiver selects transmit when keying, then automatically returns to receive after a pre-set time after you stop sending.

q Push	CW	to select CW or CW-R mode.
wPush		once or twice to turn the semi break-in
	BK-IN
function ON.

• “ BKIN ” appears.

eRotate [DELAY] to set the break-in delay time (the delay from transmit to receive).

When using a paddle, rotate [KEY SPEED] to adjust the keying speed.

DFull break-in operation

During full break-in operation, the transceiver automatically enters transmit while keying and returns to receive immediately after keying is finished.

q Push	CW	to select CW or CW-R mode.
wPush			once or twice to turn the full break-in
	BK-IN

function ON.

• “ F-BKIN” appears.

When using a paddle, rotate [KEY SPEED] to adjust the keying speed.

6-3