FUNCTIONS FOR RECEIVE

5

DScope set mode (continued)

Scope during Tx (CENTER Type)

ON

Turn the transmitting signal waveform indication ON and OFF.

NOTE: The transmitting signal waveform indica- tion is available for the center mode only.

Max Hold

ON

Turn the peak level holding function ON and OFF.

CENTER Type Display

Filter Center

Select the center frequency of the spectrum scope indication (center mode only).

• Filter center : Shows the selected filter’s center frequency at the center.

Carrier Point Center

:Shows the selected operating mode carrier point frequency at the center.

Carrier Point Center (Abs. Freq.)

:In addition to the carrier point center setting above, the actual frequency is displayed for the bottom of the scope.

Waveform Color (Current)

 

 

 

0

 

 

204

 

102

 

 

 

 

 

 

 

 

 

 

Set the waveform color for the currently received sig- nals.

The color is set in RGB format.

Push [F-3•] to select R (Red), G (Green) and B (Blue), and rotate the ratio from 0 to 255 range.

The set color is indicated in the box beside the RGB scale.

Waveform Color (Max Hold)

 

 

 

0

 

 

102

 

153

 

 

 

 

 

 

 

 

 

 

Set the waveform color for the receiving signals maximum level.

The color is set in RGB format.

Push [F-3•] to select R (Red), G (Green) and B (Blue), and rotate the ratio from 0 to 255 range.

The set color is indicated in the box beside the RGB scale.

Sweep Speed (± 2.5k)

MID

Select the sweep speed for the ±2.5 kHz span selection from SLOW, MID and FAST.

NOTE: The waveform may be displayed incorrect- ly with “FAST” setting.

(± 5k)

MID

Select the sweep speed for the ±5 kHz span selection from SLOW, MID and FAST.

NOTE: The waveform may be displayed incorrect- ly with “FAST” setting.

(± 10k)

FAST

Select the sweep speed for the ±10 kHz span selection from SLOW, MID and FAST.

5-5