
8 MEMORY OPERATION
■Memory namesDEditing (programming) memory names
| DEL |
|
123 / Symbol ABC / abc | Keypad |
Ω | ≈ | SPACE |
All memory channels (including scan edges) can be tagged with alphanumeric names of up to 10 characters each.
Capital letters, small letters, numerals, some symbols (! # $ % & ¥ ? " ’ ` ^ + – ✱ / . , : ; = < > ( ) [ ] { } _ ~ @)
and spaces can be used.
qPush EXIT/SET several times to close a
wPush
r Push
•A cursor appears and blinks.
•Memory channel names of blank channels cannot be edited.
tInput the desired character by rotating the main dial or by pushing the keypad for number input.
•Push [ABC] or [abc] to toggle capital and small letters.
•Push [123] or [Symbol] to toggle numerals and symbols.
•Push
•Push
•Push
•Pushing the transceiver’s keypad,
yPush EXIT/SET to input and set the name.
• The cursor disappears.
uRepeat steps e to y to program another memory channel’s name, if desired.
iPush EXIT/SET to exit memory list screen.
CLR
Beep
Beep
Any unused memory channels can be cleared. The cleared memory channels become blank channels.
q Select memory mode with V/M .
wPush
tents.
•The programmed frequency and operating mode disap- pear.
tTo clear other memory channels, repeat steps e and r.