7 VOICE RECORDER FUNCTIONS

■Recording a message for transmit

To transmit a message using the voice recorder, record the desired message in advance as described below. The IC-7700 has digital voice memories for transmis- sion, up to 4 messages and a total message length of up to 99 sec. can be recorded.

DRecording

∫ √ REC

F-1 F-2 F-4

Appears

Adjust [MIC] control so that this

 

indicator reads within 100%.

qPush EXIT/SET several times to close a multi-func- tion screen, if necessary.

wPush [F-2•VOICE] to call up the voice recorder screen.

ePush EXIT/SET to select voice recorder menu.

rPush [F-2•MIC REC] to select the voice mic. record screen.

tPush [F-1•Y] or [F-2•Z] to select the desired mes- sage.

yPush and hold [F-4•REC] for 1 sec. to start record- ing.

•“ ●REC ” indicator appears.

•Speak into the microphone without pushing [PTT].

•Previously recorded contents are cleared.

•Audio output from the internal speaker is automatically muted.

uWhile speaking into the microphone with your nor- mal voice level, adjust the [MIC] control so that the [MIC-REC LEVEL] indicator reads within 100%.

iPush [F-4•REC] momentarily to stop recording.

•The recording is terminated automatically when the re- maining time becomes 0 sec.

oPush EXIT/SET twice to exit the voice recorder screen.

DConfirming a message for transmit

∫ √ PLAY

F-1 F-2 F-3

qPerform the steps q to r as “D Recording” above. wPush [F-1•Y] or [F-2•Z] to select the desired mes-

sage.

ePush [F-3•PLAY] to playback the recorded contents.

•“ ≈PLAY ” indicator appears.

rPush [F-3•PLAY] again to stop playback.

•Playback is terminated automatically when all of the recorded contents in the message are played.

tPush EXIT/SET twice to exit the voice recorder screen.

7-6