DFunctions for the RTTY decoder indication

HOLD/CLRWIDE

F-2F-7

RTTY/PSK EXIT/SET

• Wide screen indication

RECEIVE AND TRANSMIT

4

qPush a band key to select the desired band. w Push RTTY/PSK to select RTTY.

•After RTTY mode is selected, push and hold RTTY/PSK for 1 sec. to toggle between RTTY and RTTY-R modes.

•“RTTY” or “RTTY-R” appears.

ePush [F-3•DECODE] to display the decode screen.

•When tuned into an RTTY signal, decoded characters are displayed in the RX contents screen.

rPush [F-2•HOLD/CLR] to freeze the current screen.

•“ HOLD ” appears while the function is in use.

•Push [F-2•HOLD/CLR] again to release the function. t Push and hold [F-2•HOLD/CLR] for 1 sec. to clear

the displayed characters.

•“ HOLD ” indicator disappears at the same time when the hold function is in use.

yPush [F-7•WIDE] to toggle the RTTY decode screen size from normal and wide.

•S/RF meter type during wide screen indication can be selected in display set mode. (pgs. 3-11, 12-10)

u Push EXIT/SET to close the RTTY decode screen.

DSetting the decoder threshold level

Adjust the RTTY decoder threshold level if some characters are displayed when no signal is received.

q Select the RTTY decode screen as described above.

w Push [F-5•ADJ] to select the threshold level setting condition.

e Rotate the main dial to adjust the RTTY decoder threshold level.

• Push and hold [F-6•DEF] for 1 sec. to select the default setting.

r Push [F-5•ADJ] to exit from the threshold level setting condition.

The UnShift On Space (USOS) function and new line code can be set in the RTTY set mode. (p. 4-18)

4-15