4 RECEIVE AND TRANSMIT

DContest number set mode

This menu is used to set the contest (serial) number and count-up trigger, etc.

• Setting contents

q During CW mode operation, push [F-3•KEYER] to select memory keyer screen.

w Push EXIT/SET to select memory keyer menu, then push [F-3•001] to select contest serial number set mode.

e Push [F-1•Y] or [F-2•Z] to select the desired set item.

r Set the desired condition using the main dial.

∫

√

DEF EXIT/SET

Main dial

• Push and hold [F-4•DEF] for 1 sec. to select the default

F-1

F-2

F-4

 

 

condition or value.

 

 

 

 

• Contest number set mode screen

 

t Push

 

twice to normal screen.

 

EXIT/SET

 

 

 

 

 

 

 

 

Number Style

Normal

 

 

 

This item sets the numbering system used for contest

• Normal

: Does not use short morse numbers

(serial) numbers— normal or short morse numbers.

 

 

(default)

 

 

 

 

• 190➔ANO : Sets 1 as A, 9 as N and

0 as O.

 

 

• 190➔ANT

: Sets 1 as A, 9 as N and

0 as T.

 

 

•

90➔ NO : Sets 9 as N and 0 as O.

 

 

 

 

•

90➔ NT

: Sets 9 as N and 0 as T.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Count Up Trigger

M2

 

This selects which of the four memories will contain

• M1, M2, M3 and M4 can be set. (default: M2)

the contest serial number exchange. The count-up

 

 

trigger allows the serial number to automatically in-

 

 

crement after each complete serial number exchange

 

 

is sent.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Present Number

001

 

This item shows the current number for the count-up

• Rotate the main dial to change the number, or push

trigger channel set above.

and hold [F-3•001CLR] for 1 sec. to reset the cur-

 

 

rent number to 001.

 

 

 

 

4-10