SET MODE 12

■ Others set mode (continued)

 

 

 

 

 

FM SPLIT Offset(HF)

–0.100MHz

 

Sets the offset (difference between transmit and re-

 

 

ceive frequencies) for the quick split function. This set-

 

 

ting is used for HF bands in FM mode only and is

 

 

used to input the repeater offset for an HF band.

 

 

The offset frequency can be set from –9.999 MHz to

 

 

+9.999 MHz in 1 kHz steps. (default: –0.100 MHz)

 

 

 

 

 

 

 

 

 

 

 

 

 

FM SPLIT Offset(50M)

–0.500MHz

 

Sets the offset (difference between transmit and re-

 

 

ceive frequencies) for the quick split function. This set-

 

 

ting is used for 50 MHz band FM mode only, and is

 

 

used to input the repeater offset for the 50 MHz band.

 

 

The offset frequency can be set from –9.999 MHz to

 

 

+9.999 MHz in 1 kHz steps. (default: –0.500 MHz)

 

 

 

 

 

 

 

 

 

 

 

 

SPLIT LOCK

OFF

 

When this item is ON, the main dial can be used to

 

 

adjust the transmit frequency while pushing [XFC]

 

 

even while the lock function is activated.

 

 

(default: OFF)

 

 

See pgs. 6-6, 6-7 for split frequency operation details.

 

 

 

 

 

 

 

 

 

 

 

 

Tuner (Auto Start)

OFF

 

The internal antenna tuner has an automatic start ca-

• OFF : The tuner remains OFF even when the SWR

pability which starts tuning if the SWR is higher than

is poor (1.5–3:1). (default)

1.5–3:1.

• ON : Automatic tune starts even when the tuner is

 

 

turned OFF during HF bands operation.

 

 

 

 

 

 

 

 

 

 

Tuner (PTT Start)

OFF

 

Tuning of the internal antenna tuner can be started

 

 

automatically at the moment the PTT is pushed after

 

 

the operating frequency is changed (more than 1%

 

 

from last-tuned frequency). (default: OFF)

 

 

 

 

 

 

12-13