7 VOICE RECORDER FUNCTIONS

Sending a recorded message

T1

T2

T3

T4 EXIT/SET

T/R

F-1

F-2

F-3

F-4

F-7

 

 

 

 

 

 

 

 

Appears

Counts down

qPush EXIT/SET several times to close a multi-func- tion screen, if necessary.

wSelect a phone mode by pushing SSB or AM/FM .

ePush [F-2•VOICE] to call up the voice recorder screen.

If the receive voice message appears, push [F-7•T/R] to select TX message (T1–T4).

rPush the desired message switch, [F-1•T1] to [F-4•T4], momentarily to transmit the contents.

The transceiver transmits automatically.

SEND ” indicator appears and the memory timer counts down.

You hear the transmitted message from the speaker as the default. This can be turned OFF in voice set mode. (p. 7-9)

tPush the selected message switch, [F-1•T1] to [F-4•T4], again to stop, if desired.

The transceiver returns to receive automatically when all of the recorded contents in the message are transmit- ted.

yPush EXIT/SET twice to exit the voice memory screen.

For your information

When an external keypad is connected to [EXT KEY- PAD], the recorded message, T1–T4, can be transmitted without opening the voice recorder screen.

See page 2-7 for details.

DTransmit level setting

DEF

F-7

qCall up the voice recorder screen as described as above.

wPush [F-6•TX LEV.] to select the voice memory transmit level set condition.

ePush the desired message switch, [F-1•T1] to [F-4•T4], momentarily to transmit the contents.

The transceiver transmits automatically.

SEND ” indicator appears and the memory timer

counts down.

rRotate the main dial to adjust the transmit voice level.

TX LEV.

EXIT/SET Main dial

• Push and hold [F-7•DEF] for 1 sec. to select the default

F-6

 

 

condition.

 

 

tPush EXIT/SET to return to the voice recorder screen.

7-8