■Operating FM

[MIC]

[TX] indicator [RX] indicator Band keys

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[AF]

AM/FM

Main dial FILTER

Appears

RECEIVE AND TRANSMIT

4

qPush a band key to select the desired band. w Push AM/FM to select FM.

•“FM” indicator appears.

•After FM mode is selected, push AM/FM to toggle be- tween FM and AM modes.

eRotate the main dial to tune to the desired fre- quency.

•The S-meter indicates received signal strength when signal is received.

•10 kHz tuning step is preset for the FM mode.

• Push FILTER several times to select the desired filter width.

rRotate [AF] to set audio to a comfortable listening level.

tPush TRANSMIT or [PTT] (microphone) to transmit.

• The TX indicator lights red.

ySpeak into the microphone at your normal voice level.

•Adjust the microphone gain with [MIC] at this step, if necessary.

•FM narrow transmission is available when “FIL2” or “FIL3” is selected.

uPush TRANSMIT or release [PTT] (microphone) to return to receive.

D Convenient functions for receive

• Preamp (p. 5-9)

• Attenuator (p. 5-9)

➥ Push [P.AMP] (MF3) several times to set the pre-

➥ Push [ATT] (MF4) several times to set the attenu-

amp OFF, preamp 1 ON or preamp 2 ON.

ator in 6 dB steps.

• “P.AMP1” or “P.AMP2” appears when the preamp 1 or

• Push and hold [ATT] (MF4) for 1 sec. to turn the atten-

preamp 2 is ON.

uator function OFF.

• Auto notch filter (p. 5-18)

• “ATT” and attenuation level appear when the attenu-

ator is ON.

➥ Push

NOTCH

to turn the auto notch function

• Audio tone control (p. 12-4)

ON and OFF.

• Notch indicator (above

 

switch) lights when

➥ Push [F-7•SET] then [F-1•LEVEL] to enter level

NOTCH

the auto notch is ON.

set mode. Select an item with [F-1•Y]/[F-2•Z]

 

 

 

 

 

then rotate the main dial to adjust the audio tone.

 

 

 

 

 

 

DConvenient functions for transmit

• VOX (voice operated transmit) (p. 6-2)

• Audio tone control (p. 12-5)

➥ Push

 

VOX

to turn the VOX function ON and

➥ Push [F-7•SET] then [F-1•LEVEL] to enter level

OFF.

 

 

 

 

set mode. Select an item with [F-1•Y]/[F-2•Z]

• “

 

 

” appears when the VOX function is ON.

then rotate the main dial to adjust the audio tone.

VOX

• Transmit quality monitor (p. 6-4)

 

➥ Push

 

 

 

to turn the monitor function ON

 

 

MONITOR

 

and OFF.

• Rotate [MONI GAIN] to adjust the monitor gain.

• Monitor indicator (above MONITOR switch) lights when the monitor function is ON.

4-31