Icom IC-7700 ■Memory scan operation, ■Select memory scan operation

9 SCANS

■Memory scan operation

[SQL] MEMO EXIT/SET Main dial

F-1

qPush EXIT/SET several times to close a multi-func- tion screen, if necessary.

wSelect memory mode.

ePush [F-5•SCAN] to select the scan screen. r Set [SQL] open or closed.

•See page 9-2 for squelch condition.

tPush [F-1•MEMO] to start the memory scan.

•“ MEMORY SCAN ” and decimal points blink while scan- ning.

yWhen the scan detects a signal, the scan stops, pauses or ignores it depending on the resume set- ting and the squelch condition.

uTo cancel the scan, push [F-1•MEMO].

• Rotating the main dial also cancels the scan.

2 or more memory channels must be programmed for memory scan to start.

■Select memory scan operation

SELECT	SEL No.
F-3	F-5

[SQL] MEMO EXIT/SET Main dial

F-1

qPush EXIT/SET several times to close a multi-func- tion screen, if necessary.

wSelect memory mode.

ePush [F-5•SCAN] to select the scan screen. r Set [SQL] open or closed.

•See page 9-2 for squelch condition.

tPush [F-5•SEL No.] several times to select the se- lect scan number from ★1, ★2, ★3 and ★1/★2/★3.

yPush [F-1•MEMO] to start the memory scan.

•“ MEMORY SCAN ” and decimal points blink while scan- ning.

uPush [F-3•SELECT] to start select memory scan; push [F-3•SELECT] again to return to memory scan, if desired.

• “ SELECT MEMORY SCAN ” blinks instead of

“MEMORY SCAN ” during select memory scan.

iWhen the scan detects a signal, the scan stops, pauses or ignores it depending on the resume set- ting and the squelch condition.

oTo cancel the scan, push [F-1•MEMO].

• Rotating the main dial also cancels the scan.

2 or more memory channels must be designated as

select memory channels, as well as the same select

scan channel number, for select memory scan to start.

9-6