8 MEMORY OPERATION

Frequency transferringDTransferring in VFO mode

TRANSFERRING EXAMPLE IN VFO MODE

Operating frequency : 21.320 MHz/USB (VFO)

Contents of M-ch 16 : 14.018 MHz/CW

or

Beep

V/MBeep Push for 1 sec.

Beep

The frequency and operating mode in a memory channel can be transferred to the VFO. Frequency transferring can be performed in either VFO mode or memory mode.

This is useful for transferring programmed contents to a VFO.

q Select VFO mode with V/M .

wSelect the memory channel to be transferred with

/ .

Memory list screen is convenient for selecting the de- sired channel.

Memory channel contents appear in the memory chan- nel readout (below the frequency readout).

“--.---.--” appears if the selected memory channel is a blank channel. In this case transferring is not possible.

ePush and hold V/M for 1 sec. to transfer the frequency and operating mode.

Transferred frequency and operating mode appear on the frequency readout.

DTransferring in memory mode

TRANSFERRING EXAMPLE IN MEMORY MODE Operating frequency : 21.320 MHz/USB (M-ch 16) Contents of M-ch 16 : 14.018 MHz/CW

Beep

V/MBeep Push for 1 sec.

Beep

Programmed contents appear.

This is useful for transferring frequency and operating mode while operating in memory mode.

When you have changed the frequency or operat-

ing mode in the selected memory channel:

Displayed frequency, mode and filter setting are

transferred.

Programmed frequency and mode in the memory

channel are not transferred, and they remain in the memory channel.

qSelect the memory channel to be transferred with

/ in memory mode.

• And, set the frequency or operating mode if required.

wPush and hold V/M for 1 sec. to transfer the frequency and operating mode.

Displayed frequency and operating mode are transferred to the VFO.

eTo return to VFO mode, push V/M momentarily.

8-4