BASIC OPERATIONS

3

DSelecting 1 Hz step

A minimum tuning step of 1 Hz can be used for fine tuning.

q Push [TS] to turn the quick tuning function OFF. w Push and hold [TS] for 1 sec. to turn the 1 Hz tuning

step ON and OFF.

1Hz step indicator

DAuto tuning step function

∫

√

OTHERS EXIT/SET

SET

F-1

F-2

F-5

F-7

When rotating the main dial rapidly, the tuning speed accelerates automatically as selected.

qPush EXIT/SET several times to close a multi-func-

tion screen, if necessary.

wPush [F-7•SET] to select set mode menu screen.

•Pushing and holding EXIT/SET for 1 sec. also selects set mode menu screen.

ePush [F-5•OTHERS] to enter Others set mode. r Push [F-1•Y] or [F-2•Z] to select “MAIN DIAL Auto

TS.”

t Rotate the main dial to select the desired condition from high, low and OFF.

•High : Approx. 5 times faster

•Low : Approx. twice faster

•OFF : Auto tuning step is turned OFF.

y Push EXIT/SET to exit the set mode.

DBand edge warning beep

When you tune outside of an amateur band’s frequency range, a warning beep sounds.

This function can be turned OFF in set mode, if de- sired.

q Push EXIT/SET several times to close a multi-function screen, if necessary.

w Push [F-7•SET] to select set mode menu screen.

• Pushing and holding EXIT/SET for 1 sec. also selects set mode menu screen.

e Push [F5•OTHERS] to enter Others set mode.

r Push [F-1•Y] or [F-2•Z] to select “Beep (Band Edge).”

t Rotate the main dial to turn the band edge warning beep ON and OFF.

y Push EXIT/SET to exit the set mode.

3-7