■Recording a received audioDBasic recording

VOICE

REC EXIT/SET

T/R

F-2

 

F-7

DOne-touch recording

REC

VOICE RECORDER FUNCTIONS

7

Up to 20 receive voice memories are available in the IC-7700. A total audio length of up to 209 sec. can be recorded in receive messages. However, the maximum recordable length into a single message is 30 sec.

This voice recorder records not only the received audio, but also the information such as set operating frequency, mode, and the recording time for your future reference.

qPush EXIT/SET several times to close a multi-func- tion screen, if necessary.

wSelect the desired mode.

ePush [F-2•VOICE] to call up the voice recorder screen.

•Previously selected screen, TX or RX memory, is dis- played. If the TX memory channel (T1–T4) appears, push [F-7•T/R] to select RX memory channel.

rPush and hold REC for 1 sec. to start recording.

•The operating frequency, mode and current time are pro- grammed as the memory names automatically.

tPush REC momentarily to stop recording.

IMPORTANT!

Push REC to stop recording before, or when

30 sec. has passed from the start of recording. The voice recorder memory records the 30 sec. (max.) of audio before REC is pushed.

For example, when recording 40 sec. of audio,

the first 10 sec. audio will be over-written with the

last 10 sec., so that the total of audio recorded is

only 30 sec.

When you record the 21st audio message, or

when the total audio length exceeds 209 sec., the oldest recorded audio is automatically erased to make room for the new audio.

yPush EXIT/SET twice to exit the voice recorder screen.

NOTE: When transmit (or [PTT] is pushed) while recording, no audio will be recorded.

To record the received signal immediately, one-touch voice recording is available.

➥Push REC momentarily to record the previous 15 sec. audio.

•The recordable time period can be set in voice set mode. (p. 7-9)

7-3