12 SET MODE

■ ACC set mode (continued)

 

 

 

 

 

 

DATA3 MOD

MIC

 

 

Selects the desired connector(s) for modulation input

• MIC

: Use the signals from [MIC]. (default)

when data 3 mode (D3) is in use.

• ACC

: Use the signals from [ACC1] (pin 4).

 

 

• MIC,ACC

: Use the signals from [MIC] and [ACC1]

 

 

 

(pin 4).

 

 

• S/P DIF

: Use the signals from [S/P DIF].

 

 

 

 

 

 

 

 

 

 

 

SEND Relay Type

Lead

 

 

Selects the switching relay type for [RELAY] from

• Lead

: Use mechanical relay.

Lead and MOSFET.

 

(16 V DC/0.5 A max.; default)

Select the suitable relay type when connecting a non-

• MOS-FET: Use semiconductor type relay.

Icom linear amplifier.

 

(250 V/200 mA max.)

 

 

 

 

 

 

 

 

 

 

 

 

 

External Meter Output

Auto

 

 

 

Selects the desired item for an external meter indica-

• Auto

: Outputs the receiving signal strength level

tion.

 

 

during receive, and outputs the selected

 

 

 

 

level (selected with [METER]), during

 

 

 

 

transmit. (default)

 

 

• S

: Outputs the receiving signal strength level

 

 

 

 

during receive.

 

 

• Po

: Outputs the transmitting power level dur-

 

 

 

 

ing transmit.

 

 

• SWR

: Outputs the VSWR level during transmit.

 

 

• ALC

: Outputs the ALC level during transmit.

 

 

• COMP

: Outputs the compression level during

 

 

 

 

transmit.

 

 

• VD

: Outputs the drain terminal voltage of the

 

 

 

 

final amplifier MOSFETs.

 

 

• ID

: Outputs the drain current of the final am-

 

 

 

 

plifier MOSFETs.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

External Meter Level

 

 

 

50%

 

Sets the output level for an external meter indication with in 0 to 100% range in 1% steps.

•Approx. 2.5 V at 50% (default) setting for full-scale indica- tion. (4.7 kΩ impedance)

12-8