Icom IC-7700 ■Memory list screen, DConfirming programmed memory channels, DSelecting a memory channel using the memory list screen, • Memory list screen

MEMORY OPERATION 8

■Memory list screen

The memory list screen simultaneously shows 9 memory channels and their programmed contents. 15 memory channels can be displayed in the wide memory list screen.

You can select a desired memory channel from the memory list screen.

DSelecting a memory channel using the memory list screen

ZY

ROLL MEMORY WIDE EXIT/SET Main dial

F-1 F-4 F-7

qPush EXIT/SET several times to close a multi-func- tion screen, if necessary.

wPush [F-4•MEMORY] to select memory list screen.

•[F-7•WIDE] switches the standard and wide screens. eWhile pushing and holding [F-1•ROLL], rotate the

main dial to select the desired memory channel.

•∫ and √ can also be used.

rPush EXIT/SET to exit memory list screen.

• Memory list screen

DConfirming programmed memory channels

ROLL SET EXIT/SET Main dial

F-1 F-2

qSelect memory list screen as described above.

wWhile pushing [F-1•ROLL], rotate the main dial to scroll the screen.

ePush [F-2•SET] to select the highlighted memory channel, if desired.

•“≈” appears beside the selected memory channel num- ber in the memory list screen and the selected memory channel contents are displayed below the frequency readout.

rPush EXIT/SET to exit memory list screen.

8-5