4 RECEIVE AND TRANSMIT

DRTTY memory transmission

RT1

–

RT4

or

RT5

–

RT8

EXIT/SET

1–4/5–8

F-1

 

F-4

 

F-1

 

F-4

 

F-7

Pre-set characters can be sent using the RTTY mem- ory. Contents of the memory are set using the edit menu.

qDuring RTTY mode operation, push [F-3•DECODE] to select RTTY decode screen.

wPush [F-4•TX MEM] to select RTTY memory screen.

ePush [F-7•1–4/5–8] to select memory bank then push one of the function keys ([F-1•RT1] to [F-4•RT4] or [F-1•RT5] to [F-4•RT8]).

•When no keyboard is connected, the selected memory contents will be transmitted immediately.

•When a keyboard is connected, the memory contents will be transmitted immediately when function key is pushed, or transmitted after [F12] on the connected key- board is pressed, depending on auto transmission/re- ception setting (see below).

•The transmission date, time, reception date and/or time may be displayed in RX contents screen, depending on setting.

DAutomatic transmission/reception setting

AUTO TX EXIT/SET

RT1..RT8

F-6

F-7

qDuring RTTY mode operation, push [F-3•DECODE] to select RTTY decode screen.

wPush [F-4•TX MEM] to select RTTY memory screen, then push [F-6•EDIT] to select RTTY mem- ory edit screen.

•RTTY memory contents of the Channel 1 (RT1) is se- lected.

ePush [F-7•RT1..RT8] several times to select the de- sired RTTY memory.

rPush [F-6•AUTO TX] several times to select the de- sired condition as follow.

•AUTO TX/RX : Automatically transmits the se- lected memory and returns to re- ceive after the transmission.

• AUTO TX

: Automatically transmits the se-

 

lected memory. To return to re-

 

ceive, press [F12] on the key-

 

board.

• AUTO RX

: Press [F12] on the keyboard to

 

transmit the selected memory. Au-

 

tomatically returns to receive after

 

the transmission.

•No indication : Press [F12] on the keyboard to transmit the selected memory and press [F12] again to return to re- ceive.

tPush EXIT/SET to exit RTTY memory edit condition.

NOTE: The transceiver always functions in the “AUTO TX/RX” setting when no keyboard is con- nected.

4-16