[MIC] | [TX] indicator [RX] indicator Band keys | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[AF] | AM/FM | Main dial |
Appears
RECEIVE AND TRANSMIT | 4 |
qPush a band key to select the desired band. w Push AM/FM to select AM.
•“AM” indicator appears.
•After AM mode is selected, push AM/FM to toggle be- tween AM and FM modes.
eRotate the main dial to tune to the desired fre- quency.
•The
rRotate [AF] to set audio to a comfortable listening level.
tPush TRANSMIT or [PTT] (microphone) to transmit.
• The TX indicator lights red.
ySpeak into the microphone at your normal voice level.
•Adjust the microphone gain with [MIC] at this step, if necessary.
uPush TRANSMIT or release [PTT] (microphone) to return to receive.
DConvenient functions for receive
•Preamp (p.
➥Push [P.AMP] (MF3) several times to set the pre- amp OFF, preamp 1 ON or preamp 2 ON.
•“P.AMP1” or “P.AMP2” appears when the preamp 1 or preamp 2 is ON.
•Twin PBT (passband tuning) (p.
➥Rotate [TWIN PBT] controls (inner/outer).
•PBT indicator (above
• Push and hold
•Attenuator (p.
➥Push [ATT] (MF4) several times to set the attenu- ator in 6 dB steps.
•Push and hold [ATT] (MF3) for 1 sec. to turn the atten- uator function OFF.
•“ATT” and attenuation level appear when the attenu- ator is ON.
➥Push NOTCH to turn the manual notch function ON and OFF.
•Rotate [NOTCH] control to set the attenuating fre- quency.
•Notch indicator (above NOTCH switch) lights when either the auto or manual notch is ON.
• Noise blanker (p.
➥ Push NB to turn the noise blanker ON and OFF, and then rotate [NB] control to adjust the threshold level.
• Noise blanker indicator (above NB switch) lights when the noise blanker is ON.
• Push and hold NB for 1 sec. to enter noise blanker set mode.
• Noise reduction (p.
➥ Push NR to turn the noise reduction ON and OFF.
•Rotate [NR] control to adjust the noise reduction level.
• Noise reduction indicator (above NR switch) lights when the noise reduction is ON.
•Audio tone control (p.➥Push
➥Push [AGC] switch several times to select AGC FAST, AGC MID or AGC SLOW.
➥ Push AGC VR to turn the AGC time constant
manual setting ON and OFF.
•Rotate [AGC] control to adjust the time constant.
•Auto tuning function (p.➥Push [AUTOTUNE] to turn the auto tuning func- tion ON and OFF.
•The transceiver automatically tunes the desired sig- nal within ±5 kHz range.
IMPORTANT!
When receiving a weak signal, or receiving a signal with interference, the automatic tuning function may not tune, or may tune to an undesired signal.