SCANS 9

■Fine programmed scan/Fine ∂F scan

PROG ∂F FINE EXIT/SET

F-1 F-2 F-3

In fine scan (programmed or ∂F), the scan speed decreases when the squelch opens, but the transceiver keeps scanning. The scanning tuning step shifts from 50 Hz to 10 Hz when the squelch opens.

qPush EXIT/SET several times to close a multi-func- tion screen, if necessary.

wPush [F-5•SCAN] to select the scan screen.

eSet for programmed scan or ∂F scan as described on previous page.

rPush [F-1•PROG] or [F-2•∂F] to start a scan.

•“ PROGRAM SCAN ” or “ :F SCAN ” and decimal points blink while scanning.

tPush [F-3•FINE] to start a fine scan.

•“ FINE PROGRAM SCAN ” or “ FINE :F SCAN ” blinks in-

stead of “ PROGRAM SCAN ” or “ :F SCAN ,” respec- tively.

yWhen the scan detects a signal, the scan speed de- creases but scan does not stop.

uPush [F-1•PROG] or [F-2•∂F] to stop the scan; push [F-3•FINE] to cancel the fine scan.

• Rotating the main dial also cancels the scan.

iPush and hold [F-6•RECALL] for 1 sec. to recall the frequency that is set before starting the scan, if de- sired.

9-5