Icom IC-7700 DCommand table (continued)

14 CONTROL COMMAND

DCommand table (continued)

Command	Sub command	Description
14	18 + Level data	[CONTRAST] setting (0=max.
		CCW to 255=max. CW)
	19 + Level data	[BRIGHT] setting
		(0=max. CCW to 255=max. CW)
15	01	Read squelch condition
	02	Read S-meter level
	11	Read RF power meter
	12	Read SWR meter
	13	Read ALC meter
	14	Read COMP meter
	15	Read VD meter
	16	Read ID meter

1602 Send/read Preamp setting (0=OFF; 1=preamp 1;

		2=preamp 2)
	12	Send/read AGC selection
		(0=OFF; 1=Slow; 2=Mid; 3=Fast)
	22	Send/read noise blanker setting
		(0=OFF; 1=ON)
	32	Send/read Audio peak filter set-
		ting for CW mode
		(APF type=SHARP: 0=OFF;
		1=320 Hz; 2=160 Hz; 3=80 Hz,
		APF type=SOFT: 0=OFF;
		1=WIDE; 2=MID; 3=NAR)
	40	Send/read noise reduction setting
		(0=OFF; 1=ON)
	41	Send/read auto notch setting
		(0=OFF; 1=ON)
	42	Send/read repeater tone setting
		(0=OFF; 1=ON)
	43	Send/read tone squelch setting
		(0=OFF; 1=ON)
	44	Send/read speech compressor
		setting (0=OFF; 1=ON)
	45	Send/read monitor setting
		(0=OFF; 1=ON)
	46	Send/read VOX function setting
		(0=OFF; 1=ON)
	47	Send/read Break-in function set-
		ting (0=OFF; 1=semi break-in;
		2=full break-in)
	48	Send/read manual notch setting
		(0=OFF; 1=ON)
	4C	Send/read VSC setting
		(0=OFF; 1=ON)
	4D	Send/read Manual AGC setting
		(0=OFF; 1=ON)
	4E	Send/read DIGI-SEL setting
		(0=OFF; 1=ON)
	4F	Send/read twin peak filter setting
		(0=OFF; 1=ON)
	50	Send/read dial lock function set-
		ting (0=OFF; 1=ON)
	53	Send/read RX antenna connector
		setting (0=OFF; 1=ON)
19	00	Read the transceiver ID
1A	00	Send/read memory contents (see
		p. 14-9 for details)
	01	Send/read band stacking register
		contents (see p. 14-9 for details)
	02	Send/read memory keyer con-
		tents (see p. 14-9 for details)

Command	Sub command	Description
1A	03	Send/read the selected filter width
		(SSB, CW, PSK: 0=50 Hz to
		40=3600 Hz; RTTY: 0=50 Hz to
		31=2700 Hz; AM: 0=200 Hz to
		49=10 kHz)
	04	Send/read the selected AGC time
		constant (0=OFF, 1=0.1/0.3 sec.
		to 13=6.0/8.0 sec.)
	050001	Send/read SSB RX HPF/LPF
		(HPF: 0=Through, 1=100 to
		20=2000, LPF: 5=500 to
		24=2400, 25=Through)
	050002	Send/read SSB RX Tone (Bass)
		level (0 =–5 to 10=+5)
	050003	Send/read SSB RX Tone (Treble)
		level (0=–5 to 10=+5)
	050004	Send/read AM RX HPF/LPF
		(HPF: 0=Through, 1=100 to
		20=2000, LPF: 5=500 to
		24=2400, 25=Through)
	050005	Send/read AM RX Tone (Bass)
		level (0 =–5 to 10=+5)
	050006	Send/read AM RX Tone (Treble)
		level (0=–5 to 10=+5)
	050007	Send/read FM RX HPF/LPF
		(HPF: 0=Through, 1=100 to
		20=2000, LPF: 5=500 to
		24=2400, 25=Through)
	050008	Send/read FM RX Tone (Bass)
		level (0 =–5 to 10=+5)
	050009	Send/read FM RX Tone (Treble)
		level (0=–5 to 10=+5)
	050010	Send/read CW RX HPF/LPF
		(HPF: 0=Through, 1=100 to
		20=2000, LPF: 5=500 to
		24=2400, 25=Through)
	050011	Send/read RTTY RX HPF/LPF
		(HPF: 0=Through, 1=100 to
		20=2000, LPF: 5=500 to
		24=2400, 25=Through)
	050012	Send/read PSK RX HPF/LPF
		(HPF: 0=Through, 1=100 to
		20=2000, LPF: 5=500 to
		24=2400, 25=Through)
	050013	Send/read SSB TX Tone (Bass)
		level (0 =–5 to 10=+5)
	050014	Send/read SSB TX Tone (Treble)
		level (0=–5 to 10=+5)
	050015	Send/read AM TX Tone (Bass)
		level (0 =–5 to 10=+5)
	050016	Send/read AM TX Tone (Treble)
		level (0=–5 to 10=+5)
	050017	Send/read FM TX Tone (Bass)
		level (0 =–5 to 10=+5)
	050018	Send/read FM TX Tone (Treble)
		level (0=–5 to 10=+5)
	050019	Send/read SSB TX bandwidth for
		wide (see p. 14-10 for details)
	050020	Send/read SSB TX bandwidth for
		mid. (see p. 14-10 for details)
	050021	Send/read SSB TX bandwidth for
		narrow (see p. 14-10 for details)
	050022	Send/read speech level
		(0=0% to 255=100%)

14-4