
CONTROL COMMAND 14
DCommand table (continued)
Command | Sub command | Description |
|
|
|
1A | 050023 | Send/read CW side tone gain |
|
| (0=min. to 255=max.) |
| 050024 | Send/read CW side tone gain limit |
|
| (0=OFF, 1=ON) |
| 050025 | Send/read beep gain |
|
| (0=min. to 255=max.) |
| 050026 | Send/read beep gain limit |
|
| (0=OFF, 1=ON) |
| 050027 | Send/read headphones output |
|
| ratio (0=0.60 to 255=1.40) |
| 050028 | Send/read AF output level to ACC |
|
| (0=0% to 255=100%) |
| 050029 | Send/read S/P DIF output level |
|
| (0=0% to 255=100%) |
| 050030 | Send/read MOD output level to |
|
| ACC (0=0% to 255=100%) |
| 050031 | Send/read S/P DIF MOD output |
|
| level (0=0% to 255=100%) |
| 050032 | Send/read MOD input connector |
|
| during DATA OFF (0=MIC; |
|
| 1=ACC; 2=MIC/ACC; 3=S/P DIF) |
| 050033 | Send/read MOD input connector |
|
| during DATA1 |
|
| (0=MIC; 1=ACC; 2=MIC/ACC; |
|
| 3=S/P DIF) |
| 050034 | Send/read MOD input connector |
|
| during DATA2 |
|
| (0=MIC; 1=ACC; 2=MIC/ACC; |
|
| 3=S/P DIF) |
| 050035 | Send/read MOD input connector |
|
| during DATA3 |
|
| (0=MIC; 1=ACC; 2=MIC/ACC; |
|
| 3=S/P DIF) |
| 050036 | Send/read relay type selection |
|
| (0=Lead, |
| 050037 | Send/read external meter output |
|
| selection |
|
| (0=Auto, 1=S, 2=Po, 3=SWR, |
|
| 4=ALC, 5=COMP, 6=VD, 7=ID) |
| 050038 | Send/read external meter output |
|
| level (0=0% to 255=100%) |
| 050039 | Send/read reference signal in/out |
|
| setting (0=OFF, 1=IN, 2=OUT) |
| 050040 | Send/read reference signal fre- |
|
| quency setting |
|
| (0=0% to 255=100%) |
| 050041 | Send/read LCD unit backlight |
|
| brightness (0=0% to 255=100%) |
| 050042 | Send/read switch indicator bright- |
|
| ness (0=0% to 255=100%) |
| 050043 | Send/read screen image type |
|
| (0=A, 1=B) |
| 050044 | Send/read frequency readout font |
|
| (0=Basic (1), 1=Basic (2), 2=Italic, |
|
| 3=Round, 4=Slim) |
| 050045 | Send/read meter response setting |
|
| (0=SLOW, 1=MID, 2=FAST) |
| 050046 | Send/read meter type |
|
| (0=Standard, 1=Edgewise, 2=Bar) |
| 050047 | Send/read meter type during wide |
|
| screen or mini scope indication |
|
| (0=Edgewise, 1=Bar) |
| 050048 | Send/read peak hold set for Bar |
|
| meter (0=OFF, 1=ON) |
|
|
|
Command | Sub command | Description |
|
|
|
1A | 050049 | Send/read memory name indica- |
|
| tion setting (0=OFF, 1=ON) |
| 050050 | Send/read audio peak filter width |
|
| |
|
| (0=OFF, 1=ON) |
| 050051 | Send/read manual notch width |
|
| |
|
| (0=OFF, 1=ON) |
| 050052 | Send/read screen saver set |
|
| (0=OFF, 1=15 min., 2=30 min., |
|
| 3=60 min.) |
| 050053 | Set/read screen saver type |
|
| (0=Bound, 1=Rotation, 2=Twist) |
| 050054 | Send/read output signal setting for |
|
| external display (0=OFF, 1=ON) |
| 050055 | Send/read synchronous pulse |
|
| level setting (0=L, 1=H) |
| 050056 | Send/read opening message indi- |
|
| cation (0=OFF, 1=ON) |
| 050057 | Send/read opening message con- |
|
| tents (see p. |
| 050058 | Send/read date |
|
| (20000101=1st Jan. 2000 to |
|
| 20991231=31st Dec. 2099) |
| 050059 | Send/read time |
|
| (0000=00:00 to 2359=23:59) |
| 050060 | Send/read CLOCK2 function |
|
| (0=OFF, 1=ON) |
| 050061 | Send/read offset time for CLOCK2 |
|
| |
|
| 240000=+24:00) |
| 050062 | Send/read CLOCK2 name |
|
| (up to |
| 050063 | Send/read calibration marker |
|
| (0=OFF, 1=ON) |
| 050064 | Send/read confirmation beep |
|
| (0=OFF, 1=ON) |
| 050065 | Send/read band edge beep |
|
| (0=OFF, 1=ON) |
| 050066 | Send/read beep audio frequency |
|
| (50=500 Hz to 200=2000 Hz) |
| 050067 | Send/read quick split set |
|
| (0=OFF, 1=ON) |
| 050068 | Send/read FM split offset |
|
| to +9.999 MHz for HF |
|
| (see p. |
| 050069 | Send/read FM split offset |
|
| to +9.999 MHz for 50 MHz |
|
| (see p. |
| 050070 | Send/read split lock set |
|
| (0=OFF, 1=ON) |
| 050071 | Send/read tuner auto start set |
|
| (0=OFF, 1=ON) |
| 050072 | Send/read PTT tune set |
|
| (0=OFF, 1=ON) |
| 050073 | Send/read transverter set |
|
| (0=OFF, 1=ON) |
| 050074 | Send/read transverter offset |
|
| (see p. |
| 050075 | Send/read RTTY mark frequency |
|
| (0=1275 Hz, 1=1615 Hz, |
|
| 2=2125 Hz) |
| 050076 | Send/read RTTY shift width |
|
| (0=170 Hz, 1=200 Hz, 2=425 Hz) |
|
|
|