SET MODE 12

■ ACC set mode (continued)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REF IN/OUT

OFF

 

 

 

Selects the transceiver’s reference signal condition

• IN

: Use an external reference signal for the IC-

from IN, OFF and OUT.

 

 

7700. Turn the transceiver power OFF then

 

 

 

 

ON to make the setting effective.

 

 

• OFF

: Not input/output the reference signal.

 

 

 

 

(default)

 

 

• OUT

: Outputs the IC-7700 reference signal to ex-

 

 

 

 

ternally connected equipment(s) for their ref-

 

 

 

 

erence.

 

 

 

NOTE: If the applied reference signal is off-fre-

 

 

 

quency, or no signal is applied with “IN” selection,

 

 

 

the IC-7700 will not work properly. Select “OFF” or

 

 

 

“OUT” then reboot the IC-7700 in such case.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REF Adjust

 

 

 

50%

 

Adjusts the internal reference signal frequency within

 

NOTE: Default setting is different for each trans-

0 to 100% range in 1% steps during frequency cali-

 

ceiver.

bration.

 

 

 

 

 

 

 

 

 

 

 

■ Display set mode

 

 

 

 

 

 

 

 

 

 

 

 

LCD Unit Bright

 

 

 

50%

 

 

 

 

 

 

Adjusts the LCD unit brightness from 0 (dark) to 100%

 

 

 

 

 

(bright) range in 1% steps. (default: 50%)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Backlight (Switches)

 

 

 

80

 

 

 

 

 

 

Adjusts the switch indicators brightness from 1 (dark)

 

 

 

 

 

to 100 (bright) range in 1 steps. (default: 80)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Display Type

A

 

 

 

Selects the desired display type from A (Black back) and B (Blue back). (default: A)

See p.13-4 for details.

Display Font

Basic (1)

Selects the desired font for frequency readout from Basic (1), Basic (2), Italic, Round and Slim.

(default: Basic (1))

See p.13-4 for details.

12-9