12 SET MODE

■Display set mode (continued)

Meter Response

MID

Set meter needle response from SLOW, MID and FAST. (default: MID)

This setting is effective for the standard and edgewise meter type selections only.

Meter Type (Normal Screen)

Standard

Selects the desired S/RF meter type during normal screen indication from Standard, Edgewise and Bar. (default: Standard)

Meter Type (Wide Screen)

Bar

Selects the desired S/RF meter type during wide screen or mini scope indication from Edgewise and Bar. (default: Bar)

Meter Peak Hold (Bar)

ON

Turns the meter peak hold function ON and OFF. (default: ON)

This function is used for the bar meter only.

Memory Name

ON

Sets the memory name indication, during memory mode operation, ON and OFF. (default: ON)

•ON : The programmed memory name is displayed above the frequency indication.

•OFF : No memory name is displayed even a mem- ory name is programmed.

APF–Width Popup (APF OFF ON)

ON

Selects the pop-up display for the APF filter width from ON and OFF.

(default: ON)

MN–Q Popup (MN OFF ON)

ON

Enables the pop-up indication capability when the notch filter width is changed from ON to OFF. (default: ON)

12-10