6 FUNCTIONS FOR TRANSMIT

■∂TX function

[RIT/∂TX]

∂TXCLEAR

The ∂TX function shifts the transmit frequency up to ±9.999 kHz in 1 Hz steps (10 Hz steps when cancelling the 1 Hz step readout) without moving the receive fre- quency.

qPush ∂TX .

•“ ∂TX ” appears. w Rotate [RIT/∂TX].

eTo reset the ∂TX frequency, push and hold

CLEAR for 1 sec.

• Push CLEAR momentarily to reset the ∂TX frequency when the quick RIT/∂TX clear function is ON. (p. 12-15)

r To cancel the ∂TX function, push ∂TX again.

• “ ∂TX ” disappears.

D ∂TX monitor function

XFC

■Monitor function

MONITOR

[MONI GAIN]

When the ∂TX function is ON, pushing and holding [XFC] allows you to monitor the operating frequency directly (∂TX is temporarily cancelled).

✔For your convenience— Calculate function The shift frequency of the ∂TX function can be added/subtracted to the displayed frequency.

➥While displaying the ∂TX shift frequency, push and hold ∂TX for 1 sec.

The monitor function allows you to monitor your transmit IF signals in any mode. Use this to check voice characteristics while adjusting SSB transmit parameter (p. 12-5). The CW sidetone functions regardless of the MONITOR switch setting.

qPush MONITOR to switch the monitor function ON and OFF.

•[MONITOR] indicator above this switch lights green. wRotate [MONI GAIN] for the clearest audio output

while pushing [PTT] and speaking into the micro- phone.

NOTE: When using the VOX voice delay, turn the monitor function OFF; or transmitted audio will be echoed.

6-4