Icom IC-7700 ACC AF Output Level, S/PDIF Output Level, ACC MOD Level, S/PDIF MOD Level, DATA OFF MOD, MIC,ACC, DATA1 MOD, ACC, DATA2 MOD

SET MODE 12

■ACC set mode

ACC AF Output Level 50%

Sets the desired audio output level, output from [ACC1], within 0 to 100% in 1% steps.

• Outputs approx. 200 mV at 50% (default) setting.

	S/PDIF Output Level	100%
Sets the desired output level of [S/P DIF], within 0 to
100% in 1% steps. (default: 100%)
	ACC MOD Level	50%

Sets the desired audio input level for modulation from [ACC1].

• Approx. 100 mV at 50% (default) setting.

S/PDIF MOD Level 50%

Sets the desired input level for modulation from [S/P DIF], within 0 to 100% in 1% steps.

(default: 50%)

	DATA OFF MOD	MIC,ACC
Selects the desired connector(s) for modulation input		• MIC	: Use the signals from [MIC].
when data mode is not in use.		• ACC	: Use the signals from [ACC1] (pin 4).
		• MIC,ACC	: Use the signals from [MIC] and [ACC1]
			(pin 4). (default)
		• S/P DIF	: Use the signals from [S/P DIF].

	DATA1 MOD	ACC
Selects the desired connector(s) for modulation input		• MIC	: Use the signals from [MIC].
when data 1 mode (D1) is in use.		• ACC	: Use the signals from [ACC1] (pin 4).
			(default)
		• MIC,ACC	: Use the signals from [MIC] and [ACC1]
			(pin 4).
		• S/P DIF	: Use the signals from [S/P DIF].

	DATA2 MOD	MIC,ACC
Selects the desired connector(s) for modulation input		• MIC	: Use the signals from [MIC].
when data 2 mode (D2) is in use.		• ACC	: Use the signals from [ACC1] (pin 4).
		• MIC,ACC	: Use the signals from [MIC] and [ACC1]
			(pin 4). (default)
		• S/P DIF	: Use the signals from [S/P DIF].

12-7