3 BASIC OPERATIONS

DQuick tuning step

The operating frequency can be changed in larger steps (0.1, 1, 5, 9, 10, 12.5, 20 or 25 kHz selectable) for quick tuning.

q Push [TS] to turn the quick tuning function ON.

• “Z” appears when the quick tuning function is ON.

w Rotate the main dial to change the frequency in programmed kHz steps.

e Push [TS] again to turn OFF the indicator.

r Rotate the main dial for normal tuning if desired.

TS

Select mode

Main dial

Quick tuning indicator

DSelecting “kHz” step

q Push [TS] to turn the quick tuning function ON and OFF.

• “Z” appears when the quick tuning function ON.

w Push and hold [TS] for 1 sec. to enter quick tuning step set mode.

• Selected tuning steps for all modes appear. e Select the desired operating mode.

r Rotate the main dial to select the desired tuning step. t Repeat steps e and r to select quick tuning steps

for other modes, if desired.

y Push EXIT/SET to exit the setting display.

NOTE: When entering quick tuning step set mode, the quick tuning function must be activated first.

D1⁄4 tuning step function

When operating in SSB data, CW, RTTY or PSK, the 1⁄4 tuning function is available. Dial rotation is reduced to 1⁄4 of normal speed when the 1⁄4 tuning function is ON for finer tuning control.

1/4

➥ Push [1/4] (MF6) to toggle the 1⁄4 tuning function ON and OFF.

• “ 1⁄4 ” appears when the 1⁄4 tuning function is ON.

1⁄4 tuning step OFF

1⁄4 tuning step ON

1/41/4

OFFON

3-6