Icom IC-7700 ■Setting select memory channels, DSetting in scan screen, DSetting in memory list screen, DErasing the select scan setting

SCANS 9

■Setting select memory channelsDSetting in scan screen

qPush EXIT/SET several times to close a multi-function screen, if necessary.

w Select memory mode.

e Push [F-5•SCAN] to select the scan screen.

rSelect the desired memory channel to set as a select memory channel.

• ∫ / √ keys and direct keypad selections can be used.

tPush [F-3•SELECT] several times to set the memory channel as a select memory ★1, ★2, ★3 or not. yRepeat steps r to t to program another memory

channel as a select memory channel. u Push EXIT/SET to exit the scan screen.

DSetting in memory list screen

qPush EXIT/SET several times to close a multi-function screen, if necessary.

w Push [F-4•MEMORY] to select memory list screen. eRotate the main dial while pushing [F-1•ROLL] or [F-2•SET] to select the desired memory channel.

• ∫ / √ keys and direct keypad selections can be used.

rPush [F-3•SELECT] several times to set the memory channel as a select memory ★1, ★2, ★3 or not. tRepeat steps e to r to program another memory

channel as a select memory channel.

yPush EXIT/SET to exit the memory list screen.

DErasing the select scan setting

qPush EXIT/SET several times to close a multi-function screen, if necessary.

wPush [F-4•MEMORY] to select memory list screen, or push [F-5•SCAN] to select scan screen.

ePush and hold [F-3•SELECT] for 1 sec. to display memory select all clear window.

rPush one of the following keys to clear all select scan setting.

[F-1•★1] : Clears all ★1 setting.

[F-2•★2] : Clears all ★2 setting.

[F-3•★3] : Clears all ★3 setting.

[F-4•★1,2,3] : Clears all select setting.

tPush EXIT/SET to exit the memory list screen.

9-7