$7MEMO PAD-WRITE SWITCH MP-W(p. 8-7) Programs the displayed readout frequency and operating mode into a memo pad.

•The 5 most recent entries remain in memo pads.

•The memo pad capacity can be expanded from 5 to 10 in set mode. (p. 12-15)

$8MEMO PAD-READ SWITCH MP-R(p. 8-7) Each push calls up a frequency and operating mode in a memo pad. The 5 (or 10) most recently programmed frequencies and operating modes can be recalled, starting from the most recent.

•The memo pad capacity can be expanded from 5 to 10 in set mode. (p. 12-15)

$9VFO/MEMORY SWITCH V/M

➥Switches the selected readout operating mode between the VFO and memory when pushed. (pgs. 3-3, 8-2)

➥Transfers the memory contents to VFO when pushed and held for 1 sec. (p. 8-4)

%0VFO EQUALIZING SWITCH A=B (p. 3-3) Transfers the undisplayed VFO frequency to the displayed VFO frequency when pushed and held for 1 sec.

%1FILTER SWITCH FILTER (p. 5-13)

➥Selects one of 3 IF filter settings.

➥Enters the filter set screen when pushed and held for 1 sec.

%2AUDIO PEAK FILTER/TWIN PEAK FILTERSWITCH APF/TPF

➥Push to turn the audio peak filter ON and OFF during CW mode operation. (p. 4-6)

•“ APF ” appears when audio peak filter is in use.

➥Push to turn the twin peak filter ON and OFF dur- ing RTTY mode operation. (p. 4-14)

•“ TPF ” appears when twin peak filter is in use.

➥During CW mode operation, push and hold for 1 sec. to select the APF passband width from 320, 160 and 80 Hz. (p. 4-6)

%3MINI SPECTRUM SCOPE SWITCH M.SCOPE (p. 5-4)

➥Turns the mini spectrum scope screen ON and OFF when pushed.

•The mini spectrum scope screen can be displayed with another screen, such as memory or set mode screen, simultaneously.

➥Turns the spectrum scope screen ON when pushed and held for 1 sec.

PANEL DESCRIPTION

1

%4VOICE MEMORY RECORD SWITCH REC (p. 7-3)

➥Push to record the received signal for the preset time period.

•After the preset time has passed, stops recording au- tomatically.

➥Push and hold for 1 sec. to record the received signal until the recording is canceled.

•Push this switch momentarily to stop recording.

•The memory records the latest 30 sec. of audio.

%5VOICE MEMORY PLAYBACK SWITCH PLAY (p. 7-4)

➥Plays back the previously recorded audio for the preset time period when pushed.

➥Plays back all of the previously recorded audio when pushed and held for 1 sec.

%6EXIT/SET SWITCH EXIT/SET

➥Push to exit, or return to the previous screen in- dication during spectrum scope, memory, scan or set mode screen display.

➥Displays set mode menu screen when pushed and held for 1 sec.

%7MAIN DIAL

Changes the displayed frequency, selects set mode setting, etc.

%8LOCK SWITCH [LOCK] (p. 5-17)

Push to switch the dial lock function ON and OFF.

%9SPEECH SWITCH SPEECH (p. 3-11)

➥Push to announce the S-meter indication and the selected frequency.

➥The selected operating mode is additionally an- nounced when pushed and held for 1 sec.

^0SPLIT SWITCH SPLIT (p. 6-6)

➥Turns the split function ON and OFF when pushed.

➥Turns the split function ON. When pushed and held for 1 sec. in non-FM modes, transfers the unselected VFO’s readout frequency to the se- lected VFO’s readout and sets the unselected VFO to transmit VFO. (Quick split function)

•The offset frequency is shifted from the selected VFO frequency in FM mode. (p. 12-13)

•The quick split function can be turned OFF using set mode. (p. 12-12)

➥Turns the split function ON and shifts the unse- lected VFO frequency after inputting an offset.

1-9