Icom IC-7700 ■Memory channels, ■Memory channel selection, DUsing the keypad, D Using the ∫ / √ keys, OVER, MEMORY, MEMORY, TO VFO, NUMBER, CHANNEL, WRITING, TRANSFER

8 MEMORY OPERATION■Memory channels

		The transceiver has 101 memory channels. Memory
		mode is very useful for quickly changing to often-used
		frequencies.
		All 101 memory channels are tunable which means the
		programmed frequency can be tuned temporarily with
		the main dial, etc. in memory mode.
MEMORY	MEMORY		TRANSFER	OVER-
	CHANNEL	CAPABILITY			CLEAR
CHANNEL			TO VFO	WRITING
	NUMBER
Regular memory	1–99	One frequency and one mode	Yes	Yes	Yes
channels		in each memory channel.
Scan edge		One frequency and one mode in
memory	P1, P2	each memory channel as scan	Yes	Yes	No
channels		edges for programmed scan.

■Memory channel selectionD Using the ∫ / √ keys

Y Z V/M

DUsing the keypad

Keypad F-IMPENT

Y Z V/M

q Push V/M to select memory mode.

wPush ∫ / √ several times to select the de-

sired memory channel.

• Push and hold ∫ / √ for continuous selection.

• [UP] and [DN] on the microphone can also be used. e To return to VFO mode, push V/M again.

q Push V/M to select memory mode.

wPush F-INPENT .

ePush the desired memory channel number using the keypad.

•Enter 100 or 101 to select scan edge channel P1 or P2, respectively.

rPush ∫ or √ to select the desired memory channel.

[EXAMPLE]
To select the memory channel 3;
- Push				,					, then push				or		.
			F-INPENT			7		3				∫		√
To select the memory channel 12;
- Push					,				,		, then push					or
			F-INPENT				1.8	1		3.5 2				∫
		.
	√

To select the scan edge channel P1;

- Push F-INPENT , 1.8 1 , 50 0 , 50 0 , then push

∫or √ .

To select the scan edge channel P2;

- Push F-INPENT , 1.8 1 , 50 0 , 1.8 1 , then push ∫ or √ .

8-2