MEMORY OPERATION 8■Memory channel programming

Memory channel programming can be preformed either in VFO mode or in memory mode.

DProgramming in VFO mode

YZ MW

[EXAMPLE]:

Programming 7.088 MHz/LSB into memory channel 12.

SSB

or

Beep

MWBeep Push for 1 sec.

Beep

qSet the desired frequency, operating mode and fil- ter width in VFO mode.

wPush ∫ / √ several times to select the de- sired memory channel.

•Memory list screen is convenient for selecting the de- sired channel.

•Memory channel contents appear in the memory chan- nel readout (below the frequency readout).

•“--.---.--” appears if the selected memory channel is a blank channel (and does not have contents).

ePush and hold MW for 1 sec. to program the displayed frequency, operating mode, etc., into the memory channel.

DProgramming in memory mode

[EXAMPLE]:

Programming 21.280 MHz/USB into memory channel 18.

or

then 21 7

SSB

Beep

MWBeep Push for 1 sec.

Beep

qSelect the desired memory channel with ∫ /

√in memory mode.

•Memory channel contents appear in the memory chan- nel readout (below the frequency readout).

•“--.---.--” appears if the selected memory channel is a blank channel (and does not have contents).

wSet the desired frequency and operating mode in memory mode.

•To program a blank channel, use direct frequency entry with the keypad or memo pads, etc.

ePush and hold MW for 1 sec. to program the displayed frequency and operating mode into the memory channel.

8-3