Juniper Networks fi-6000NS 3.6.9 Setting the Destination for Alert Notifications

3.6.9 Setting the Destination for Alert Notifications

An e-mail address can be specified to which an alert notification will be sent whenever a scanner alert situation occurs.

It is necessary to set a SMTP server before alert notifications can be sent. For more details about how to set an SMTP server, refer to "3.6.6 Setting the e-Mail Server (SMTP Server)" (page 69). When the destination for alert notification is set, alert notification messages will be sent to the registered e-mail address in the following title.

Network Scanner (Scanner Name: xxxx) Alert Notification message For more details, refer to "C.1.3 Alert Monitor System Log Messages" (page 287).

1.Select the [Network Settings] tab on the top menu.

2.Press the [Down] button on the left side menu.

⇒Scroll the left side menu down until the [Alert Notification] tab appears.

3.Select the [Alert Notification] tab on the left side menu.

⇒The "Alert Notification" screen appears.

84