Juniper Networks fi-6000NS Action, Message, Connection

6.3 Network Connection Troubleshooting

The following outcomes are possible:

Message	Connection	Action
	status
System time has been	OK	None
successfully synchronized.
System time synchronization	NG	Try the following:
failed.		• Check the NTP server name and address settings
Sending resync command to		for errors.
local computer...		• Check the network path between to the NTP
The computer did not resync		server for problems.
because no time data was		• The NTP server may be busy. Wait a short time
available.		before trying again to synchronize the system
		time. If that does not work, the specified server
System time synchronization
		may not be an NTP server, so try a different NTP
failed.		server.
Sending resync command to		• The specified NTP server cannot provide a
local computer...		trusted date and time. It attempted to acquire the
		date and time from a higher level NTP server,
The computer did not resync
		but failed. Try a different NTP server or have the
because only stale time data
		network administrator investigate.
was available.
System time synchronization	NG	Refer to "3.5.4 Setting the Date/Time" (page 44),
failed.		adjust the date/time, and try again.
Sending resync command to
local computer...
The computer did not resync
because the required time
change was too big.

Troubleshooting

6

Network Scanner fi-6000NS Operator's Guide 239