3.5 Using the System Settings Menus
4. Set the area for multifeed detection in the "Multifeed Detection" section.
Starting from the top edge of a document sheet, set the area to be checked for multifeeds.
Full | Multifeeds will be detected within 35mm (1.4in) of the vertical |
| centerline of the document. |
Middle | Multifeeds will be detected within "#1" (upper limit) and "#2" (lower |
| limit) set. (a) |
| 35mm |
| #1 |
#2
Up to 510mm | (a) |
|
| Outside of multifeed |
| detection area |
| Center of paper |
Top & | Multifeeds will be detected from the top of the page to "#1" (upper |
Bottom | limit), and from #2 (lower limit) to the bottom of the page. (b) |
35mm 
(b)#1
#2
Up to 510mm
(b)
Outside of multifeed detection area
Center of paper
3
Operations Administrator
Network Scanner | 51 |