4.6Saving the Scanned Data to a Network Folder
7. Press the [Scan] button.
When [Scan Viewer] is Off, this will be a [Scan&Save] button.
⇒Scanning starts.
Each page is briefly shown on the screen as it is scanned. When the scan has completed, the "Scan Viewer" screen opens.
For more details about the "Scan Viewer" screen, refer to "4.9 Editing the Scanned Data in the Scan Viewer" (page 201).
• "Scan Viewer" is initially "On".
HINT•
When the [Scan&Save] button is pressed (when [Scan Viewer] is "Off"), after the last page is displayed on the "Scanning" screen, the scan data is saved, and the touch panel screen returns to the "Main Menu".
For more details, refer to "4.8 Enabling/Disabling the Scan Viewer" (page 198).
8. Check the scanned data.
For more details about the "Scan Viewer" screen, refer to "4.9 Editing the Scanned Data in the Scan Viewer" (page 201).
9.On the "Scan Viewer" screen, press the [Save] button.
⇒The specified file name is used to save the scanned data in the selected network folder.
4
Operations User Regular
⇒The "Main Menu" screen is shown again.
After a file has been created from scanned data, while waiting for the save process to complete, the scanner prepares for the next operation. All processes queued so far are performed at the same time, and are referred to as buffer jobs. A maximum of ten jobs may be buffered.
Network Scanner |
| 167 |
| ||
|
|
|