Juniper Networks fi-6000NS ■Checking the mail server by sending a test mail

■Checking the mail server by sending a test mail

On the "Alert Notification" screen, press the [Test] button to check if an e-mail can be sent to the specified destination.

After pressing the [Test] button, a message dialog such as the following is displayed:

The following outcomes are possible.

Message	Connection	Action
	status
Testing...	OK	If no error message appears and the "testing"
		indicator disappears, the test mail was sent
		successfully to the mail server.
		Check that the alert notification e-mail has arrived
		at the specified destination. If the alert notification
		e-mail has not arrived at the expected destination,
		check that the part of thee-mail address before the
		"@" has been entered correctly.

240