3.9 Using the Maintenance Menus
3.9.4Setting the Information Output Level 
1.Select the [Maintenance] tab on the top menu.
2.Select the [Technical Support] tab on the left side menu.
⇒The "Technical Support" screen appears.
3.Enter the desired information output level.
The default level is "1".
Increasing the value of the output level increases the detail of information collected, but slows down processing. Set the level requested by your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
4.Press the [Set] button.
⇒The information output level is set.
ATTENTION | If the "Information Output Level" is set to "5", the output data |
| may contain private user information such as |
| so care should be taken when managing such data. |
3
Operations Administrator
Network Scanner |
| 127 |
| ||
|
|
|