3.6 Using the Network Settings Menus
3.6Using the Network Settings Menus
3.6.1 Giving the Scanner an IP Address 
An IP address must be set in order to connect the scanner to a network.
ATTENTION
Do not use an IP address that already exists in the network. IP address duplication will cause a network connection error. For more details about how to deal with such errors, refer to "C.1.1 Administrator Screen Messages" (page 271).
3
1.Select the [Network Settings] tab on the top menu.
2.Select the [IP Address] tab on the left side menu.
⇒The DHCP or IP address setting screen appears.
Operations Administrator
Network Scanner |
| 57 |
| ||
|
|
|