ATTENTION
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| A |
Take the following precautions when scanning plastic cards (for | ||||||||||||||||||||||||||||||||||||||||||||||
example ID cards). | ||||||||||||||||||||||||||||||||||||||||||||||
• In Scan Settings, set the Multifeed Setup to [None]. For more details | ||||||||||||||||||||||||||||||||||||||||||||||
|
| about Multifeed Setup, refer to "4.7.13 Multifeed Detection (Layer |
| |||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||
|
|
| ||||||||||||||||||||||||||||||||||||||||||||
• Place one card at a time into the ADF paper chute. |
| |||||||||||||||||||||||||||||||||||||||||||||
• Cards must be fed through the ADF in portrait mode, as in the |
| |||||||||||||||||||||||||||||||||||||||||||||
|
| following figure. |
| |||||||||||||||||||||||||||||||||||||||||||
Back | side |
PORTRAIT
LANDSCAPE
•Cards should be placed face down in the ADF paper chute.
•Embossed cards should be placed with the raised lettering side down.
•Cards should be of the following specifications:
Width ⋅ Length: 2.1in X 3.4in / 54mm X 86mm
Thickness: 0.03 ± 0.003in / 0.76 ± 0.08mm
Material: PVC (polyvinyl chloride) or PVCA (polyvinyl chloride acetate)
•Cards that are excessively rigid may not be fed smoothly by the ADF.
•Cards that have become dirty from handling should be wiped clean before scanning.
Network Scanner |
| 259 |
| ||
|
|
|