HINT

•If connection to LDAP server is not possible, try the following steps:

1.Disconnect the LAN cable and turn the scanner off.

2.Reboot the scanner with the LAN cable still disconnected, and enter a nonduplicate IP address.

3.Re-connect the LAN cable to the scanner.

•If the DHCP server cannot be reached when DHCP is set to [On], the IP Address is set to "169.254.XXX.YYY" (where XXX and YYY are arbitrary values between 0 and 255).

•If the status of the network connection is correct but the network is not communicating properly, change the [Link Speed/Duplex Mode] from "Auto-Negotiation" to a fixed mode.

90