5.Trace a line on the screen with your fingertip.

⇒A corresponding line will appear on-screen.

If the line does not appear correctly, press the [Calib screen] button to return to Step 4. If the screen becomes cluttered, press the [CLR screen] button to remove all the lines.

HINT

Press the [Cursor on/off] button to toggle the mouse cursor between its "visible" and "hidden" states.

6.When you are satisfied with the touch screen response, press the [Update] button.

⇒This saves the current calibration data, completing the calibration process, and returns you to the "Screen Calibration" screen.

ATTENTION

If the calibration is not performed carefully, or the [Enter] key is pressed before all the calibration points have been touched, the following error message may appear:

Parameter Error. Please input, again.

Press the [Enter] key to dismiss the error dialog, and perform the calibration from Step 4 again, being careful to touch each calibration point accurately.

36