•
•
•
•
•
•
•

4.4 Sending the Scanned Data by e-Mail

3.Enter a file name for the scan data into the "File Name:" field.

The file name may be up to 128 characters long.

By default, "Scanner Name" + "Scan Date/Time" is entered.

The following file names cannot be used:

ATTENTION

CON

PRN

AUX

CLOCK$

NUL

COM0 to COM9

LPT0 to LPT9

4. Check that address shown in the "From:" field is correct.

Note that no address is shown if a LDAP server is not being used, or if no e-mail address for the authenticated user has be registered in the LDAP server. In this case, directly enter the sender's e-mail address using the keyboard.

e-Mail addresses may be up to 255 characters long. Alphanumeric characters and the following symbols can be used.

- . _ @

However, _ can only be used before @. (Refer to Step 2 for complete details.)

5.Enter an e-mail title into the "Subject:" field.

The subject may be up to 128 characters long.

4

Operations User Regular

Network Scanner fi-6000NS Operator's Guide

 

143