3.5 Using the System Settings Menus
4. Touch the "+" with your fingertip.
After being touched, the "+" will move to the next calibration position. Each time it stops, touch it again.
HINT
The keyboard may also be used on the calibration screen:
• Press the [Home] key to jump straight to the
•Use the arrow keys to move the "+" to a different calibration point. This allows a bad touch to be redone.
•Press the [Esc] key to stop the calibration process and return to the "Screen Calibration" screen.
•Press the [Enter] key to close the error dialog. (Not normally needed.)
3
Operations Administrator
Repeat until the test screen appears, with the following "Calibration" dialog box:
Network Scanner |
| 35 |
| ||
|
|
|