3.6Using the Network Settings Menus
HINT
•If the IP address is the same as one already in use, network communication problems will occur. In this case, try the following steps:
1.Disconnect the LAN cable and turn the scanner off.
2.Reboot the scanner with the LAN cable still disconnected, and enter a nonduplicate IP address.
3.
•When DHCP is set to "On", the following settings are assigned by the
DHCP:
• IP Address
• Subnet Mask
• Default Gateway
• DNS Server
• WINS Server
• DNS
Even if DNS or WINS server is set, priority is given to the scanner settings over the DHCP settings.
•The connection will be lost if the scanner's IP address is changed via the Web interface. To continue with other settings, login to the Web interface again, using the new IP address if connecting via IP address.
3
Operations Administrator
Network Scanner |
| 59 |
| ||
|
|
|