3.9 Using the Maintenance Menus

4. Press the [Yes] button.

After factory default settings have been restored, the scanner is restarted.

3

ATTENTION

During factory defaults reset, do not press and hold down the startup button for longer than four seconds, as it may cause the scanner to function abnormally.

Administrator

After the factory default settings are restored, the scanner name, IP

HINT

address, and other settings will need to be set again, as described in "3.5

 

 

Using the System Settings Menus" (page 34).

Operations

Network Scanner fi-6000NS Operator's Guide

 

123