Juniper Networks fi-6000NS manual 271

6.3 Network Connection Troubleshooting

No.	Problem	Action
4	In Microsoft® Internet Explorer, in the	If the URL includes a scanner name, the
	"Tools" menu, "Internet Options", [Security]	scanner will be connected using an Intranet
	tab, the security level for the corresponding	Zone. If the URL includes an IP address, the
	zone is set as "high", or in [Custom Level],	scanner will be connected using the Internet
	"Scripting", "Active Scripting" is set to	Zone.
	"Prompt" or "Disable".	In Microsoft® Internet Explorer, in the
		"Tools" menu, "Internet Options", try the
		following settings for the corresponding zone.
		• To enable "Active Scripting", set in one of
		the following ways:
		• In the [Security] tab, set the required
		"Security level for this zone" to
		"Medium".
		• In the [Security] tab, click the [Custom
		Level] button. Then, set the
		"Scripting", "Active Scripting" to
		"Enable".
		• If connecting via the Internet zone, on the
		[Privacy] tab, set the level to below
		"Medium High".
		After the above settings have been performed,
		in "Temporary Internet Files", press the
		[Delete Cookies] button to delete all
		temporary internet files.
5	The scanner is in standby mode.	Press the startup button to start the scanner.
6	A proxy server is being used.	Set the proxy server to not be used. Open the
		"Internet Options" in the "Tools" menu of
		Microsoft® Internet Explorer, then press the
		[LAN Settings] button in the [Connections]
		tab and remove the check from the "Use a
		proxy server for your LAN (These settings will
		not apply to dial-up or VPN connections)"
		option.

This scanner is installed with a LAN card which supports the Wakeup on LAN

HINT	function. If the last time the scanner power was turned off was due to an error or
	power failure, the Wakeup on LAN function will not work.

Troubleshooting

6

Network Scanner fi-6000NS Operator's Guide 245