A.5.3 Detection by both Layer and Length
If [Both] is selected in "4.7.13 Multifeed Detection (Layer and Length)" (page 196), mulifeeds are | A |
detected by both layer and length. | |
In this case, set sheets of the same thickness and length in the ADF at any one time. | |
• Document thickness: 0.065 to 0.15mm | |
• Document length deviation: 1% or less |
|
| |
• Punched holes are not allowed within 35mm (1.4in) of the vertical center line of the |
|
document. |
|
• Do not glue on any other paper within 35mm (1.4in) of the vertical centerline of the |
|
document. |
|
•Multifeed detection by layer will often
ATTENTION | documents. When scanning such documents, select "None" on the |
| |
| "Multifeed Setup" screen. |
•Multifeed may not be detected for the top and bottom 25mm of a document.
Area where multifeed detection is possible
35mm
Page top
Front side
Feed direction
Page bottom
Center of paper
Network Scanner | 263 |