Juniper Networks fi-6000NS manual 343

Code	Message	Action
12020003	"From" address was rejected by	Contact a system administrator to check
	the server when sending fax.	that the specified e-mail source address is
		authorized for use on the server.
12020004	"To" address was rejected by	Contact a system administrator to check
	the server when sending fax.	that the specified e-mail destination
		address is authorized for use on the server.
12020005	Fax size exceeded maximum	Contact a system administrator to check
	fax size allowed by the SMTP	the "Maximum Attachment Size" setting.
	server.	"3.6.6 Setting the e-Mail Server (SMTP
		Server)" (page 69)	C
12020006	SMTP server connection was	Try the following:
	lost while sending fax data.	• Check that the LAN cable of the scanner
		and SMTP server is connected properly.
		• Contact a system administrator to check
		that then scanner IP address and SMTP
		server settings are correct.
		"6.3 Network Connection
		Troubleshooting" (page 234)
		• Contact a system administrator to check
		that the SMTP server is working
		properly.
		• Contact a system administrator to check
		the maximum e-mail size allowed by
		the SMTP server.
12020100	Error: fax could not be sent.	Contact a system administrator to check if
		sending fax is allowed.
12040001	Cannot find the network folder	Try the following:
	path.	• Check that the LAN cable of the scanner
		and file server is connected properly.
		• Check that the file server is working
		properly.
		• Contact a system administrator to check
		that the scanner IP address and network
		folder settings are correct.
		"6.3 Network Connection
		Troubleshooting" (page 234)
12040002	Access to network folder was	Contact a system administrator to check
	refused.	whether or not access to the network folder
		is permitted for the currently logged in user
		or authenticated user.

Network Scanner fi-6000NS Operator's Guide 317