Juniper Networks fi-6000NS 2.1Using the Scanner Buttons, 2.1.1 Using the Startup Button

2.1Using the Scanner Buttons

2.1.1 Using the Startup Button

When the scanner is off or in standby mode, pressing the startup button will start the scanner up and display the "Login" screen.

Operating

LED Lit

Shutdown
LED Dark	Login Screen
LED Dark

Press Button

Operation Screens

Press Button(*)

No operation

for set period

Standby

LED Blinking

*Other than pressing the startup button, any of the following operations will open the "Login" screen:

•Loading the document in the ADF paper chute.

•Closing the top cover.

•Pressing a keyboard key.

The idle time before standby mode entered can be changed. For details, refer to "3.5.5 Setting the Time to Standby Mode" (page 46).

ATTENTION

When the scanner is starting up or in standby mode, be careful to never hold the startup button down for four seconds, as this will cause the scanner to shutdown. If this happens, saved scanned data may become unusable. If the startup button is accidentally held down too long, causing the scanner to shutdown, temporally detach the AC adaptor to ensure that the power is completely off.

After turning the power off, wait for at least ten seconds before turning the power back on again. To shutdown the scanner correctly, press the [Shutdown] button on the "Login" screen.