Recording
Taking Still Images in Intelligent Auto Mode
You can record without worrying about the setting details by using the Intelligent Auto mode.
1Open the lens cover.
2Open the LCD monitor and select the still image mode.
0The still image icon B appears.
3Check if the recording mode is P Intelligent Auto.
0If the mode is H Manual, press the H/T button to switch to P Intelligent Auto.
The mode changes between Intelligent Auto and Manual with every press.
4Set the focus on the subject.
0When focused, the focus icon lights up in green. 5 Take a still image.
0PHOTO lights up when a still image is being captured.
Indications During Still Image Recording
| Display Icon | Description |
|
|
|
1 | Image Size | Displays the icon of the image size. |
|
| 0 The size of still images can be changed. |
|
| “IMAGE SIZE” (A p. 115) |
2 | Shutter Speed | Displays the shutter speed. |
|
|
|
3 | Focus | Lights up in green when focused. |
|
|
|
4 | ProgressRecording in | Appears when a still image is being captured. |
5 | Remaining Number | Displays the remaining number of shots for still |
| of Shots | image recording. |
6 | Recording Mode | Press the i.AUTO button to switch the |
|
| recording mode between P(Intelligent Auto) |
|
| and H (Manual). |
7 | Display Button n | Some displays disappear after approximately |
|
| 3 seconds. |
|
| Use the nbutton to change the displays as |
|
| shown below. |
|
| 0 Tap nbutton |
|
| Displays appear for approximately 3 |
|
| seconds with every tap. |
|
| 0 Tap and hold nbutton |
|
| Displays are fixed such that they do not |
|
| disappear. After setting, the display button |
|
| changes from nto m. |
|
| Tap mto release the displays. |
|
|
|
8 | Battery Indicator | Displays the approximate remaining battery |
|
| power. |
|
| Details of the battery power can be displayed |
|
| by pressing the INFO button. |
|
| “Remaining Recording Time/Battery Power” |
|
| (A p. 49) |
9 | Recording Media | Displays the icon of the media where still |
|
| images are recorded to. |
|
| The recording media can be changed. |
|
| “REC MEDIA FOR IMAGE” (A p. 123) |
0 | 3D/2D Mode | Displays the current recording mode of 3D or |
|
| 2D. “3D” is displayed during 3D recording, |
|
| while “2D” is displayed during 2D recording. |
32
