![](/images/new-backgrounds/1288838/288838279x1.webp)
Troubleshooting
Screen/Image
The LCD monitor is difficult to see.
The LCD monitor may be difficult to see if used in bright areas such as under direct sunlight.
The LCD monitor appears darker when 3D images are displayed. Change the display to 2D when it is difficult to see, such as when using this unit outdoors.
A band or a ball of bright light appears on the LCD monitor.
Change the direction of this unit to prevent the light source from coming into view. (A band or a ball of bright light may appear when there is a bright light source near this unit, but this is not a malfunction.)
The recorded subject is too dark.
Use backlight compensation when the background is bright and the subject is dark.
“Setting Backlight Compensation” (A p. 41) Use “NIGHTALIVE” in SCENE SELECT. “Scene Selection” (A p. 36)
Use “GAIN UP” in the menu. “GAIN UP” (A p. 103)
Set “BRIGHTNESS ADJUST” in the recording menu to the “+” side. “Adjusting Brightness” (A p. 38)
The recorded subject is too bright.
Set the backlight compensation to “OFF” if it is being used. “Setting Backlight Compensation” (A p. 41)
Set “BRIGHTNESS ADJUST” in the recording menu to the
The color looks strange. (Too bluish, too reddish, etc.)
Wait for a while until natural colors are achieved. (It may take some time for white balance to be adjusted.)
Set “WHITE BALANCE” in the recording menu to “MANUAL”. Select from “FINE”/“CLOUD”/“HALOGEN” according to the light source.
Select “MWB” and adjust accordingly. “Setting White Balance” (A p. 40)
The color looks different.
Set “WHITE BALANCE” in the recording menu to “MANUAL”. Select from “FINE”/“CLOUD”/“HALOGEN” according to the light source.
Select “MWB” and adjust accordingly. “Setting White Balance” (A p. 40)
When the video was recorded with “x.v.Color” set to “ON”, change the setting as desired on TV.
“x.v.Color (2D mode only)” (A p. 106)
Other Problems
The buttons on the touch screen do not work.
Tap the buttons on the touch screen with your fingers.
The buttons may not respond if you touch them with your fingernails or with gloves on.
The unit operates slowly when switching between video mode and still image mode, or when switching the power on or off.
It is recommended that you copy all videos and still images onto your computer, and erase the files from this unit. (If there are many recorded files on this unit, it takes time for the unit to respond.)
The image is grainy.
When digital zoom is used, the image becomes grainy as it is digitally enlarged.
This unit heats up.
This is not a malfunction. (This unit may become warm when used for a long time.)
Make a backup of important recorded data.
It is recommended to copy your important recorded data to a DVD or other recording media for storage.
JVC will not be responsible for any lost data.
When connected to the TV via the HDMI mini cable, proper images and sounds are not output.
Images and sounds may not be output properly depending on the TV connected. In such cases, perform the following operations.
A Disconnect the HDMI mini cable and connect it again. B Turn off and on this unit again.
“Connecting via the HDMI Mini Connector” (A p. 61)
The language on the display changed.
It may occur when you connect this unit to a TV with different language setting using an HDMI mini cable.
“Operating in Conjunction with TV via HDMI” (A p. 60)
TVs may operate differently depending on the specifications, even if they are
“Operating in Conjunction with TV via HDMI” (A p. 60)